Drills
Begin your search here or click on a link below to start browsing products.
Showing 55–108 of 818 results
-
#3 Morse Taper Drill w/ spindle feed, 2.5 HP, 220 RPM, 1-1/4″ drill cap. in steel, Wt: 32 lbs., lever throttle
-
Hydraulic Drive Unit, 3/4″ F sq. dr., 565 stall torque, 20 RPM load speed, 1.5HP, Wt: 28 lbs.
-
Air Drive Unit, reversible, 7/8″ ID square drive, 20 RPM, 1.35 HP, Wt: 29 lbs., lever throttle
-
Air Drive Unit, reversible, 1-13/16″ ID square drive, 20 RPM, 1.35 HP, Wt: 29 lbs., twist throttle
-
Air Drive Unit, reversible, 7/8″ ID square drive, 60 RPM, 1.35 HP, Wt: 29 lbs., twist throttle
-
Air Drive Unit, 13/16″ ID sq. drive, 20 RPM, 1.35 HP, Wt. 29 lbs., lever throttle
-
Air Drive Unit, reversible, 7/8″ ID square drive, 60 RPM, 1.35 HP, Wt: 29 lbs., lever throttle
-
Air Drive Unit, reversible, 7/8″ ID square drive, 20 RPM, 1.35 HP, Wt: 29 lbs., twist throttle
-
Air Drive Unit, 13/16″ ID sq. drive (short handle on exhaust side, lever throttle)
-
#3 Morse Taper Drill w/ spindle feed, 1.7 HP, 250 RPM, 1-1/4″ drill cap. in steel, Wt: 28 lbs., lever throttle
-
#3 Morse Taper Drill w/ spindle feed, 1.7 HP, 250 RPM, 1-1/4″ drill cap. in steel, Wt: 28 lbs., twist throttle
-
Hydraulic Corner Drill, #3 MT, 220 RPM, 3.8 HP, 1-1/4″ capacity in steel
-
Air Corner Drill, #3 MT, 260 RPM, 2.6 HP, 1-1/4″ capacity in steel
-
Air Corner Drill, #2 MT, 270 RPM, 1.8 HP, 7/8″ capacity in steel
-
Air Corner Drill, #1 MT, 500 RPM, .7 HP, 5/8″ capacity in steel
-
Male Square Drive, 3/4″ x 13/16″
-
Core Drill END 130/3.1 PO, Anchor Stand BST 104/60 V, w/60mm Motor Mount, Wt: 37 lbs.
-
Core Drill 2 1328 0050, Air Core Drill, Anchor Stand BST 300, Wt: 66 lbs.
-
Core Drill 2 1327 0010, Hydraulic Core Drill, Anchor Stand BST 300, Wt: 69 lbs.
-
Core Drill 2 1317 0030, Anchor Stand BST162 V, w/60mm Motor Mount, Wt: 47 lbs.
-
Core Drill 2 1335 0010, Anchor Stand BST162 V, w/60mm Motor Mount, Wt: 52 lbs.
-
Core Drill 2 1333 0010, Anchor Stand BST162 V, w/60mm Motor Mount, Wt: 49 lbs.
-
Core Drill EBM 352/3 P, Anchor Stand BST 300, Wt: 79 lbs.
-
Core Drill ETN 162/3, Anchor Stand BST 182 V/S, w/60mm Motor Mount, Wt: 46 lbs.
-
Core Drill ETN 2000 P, Anchor Stand BST 104/60, w/53mm Motor Mount, Wt: 36 lbs.
-
Rig-mounted Core Drill, 18 Amp, 6″ capacity, 700 RPM, Wt: 34 lbs.
-
Electric Drill, Reversible, 10 Amp, 0-430 / 0-760 RPM, 5/8″ drilling cap. in steel, Shipping Wt: 15 lbs.
-
Electric Drill, Reversible, #3MT, 22 Amp, 4-speed motor with control box
-
Electric Drill, Reversible, #3MT, 16.3 Amp, 60-140 & 200-470 RPM, 1-1/4″ cap. in steel, Wt: 14 lbs.
-
Electric Drill, Reversible, #3MT, 16.3 Amp, 30-75 & 90-230 RPM, tube rolling motor, Wt: 15 lbs.
-
Electric Drill, Reversible Model EHB 20/2.4 S
-
Electric Drill, Reversible, #3MT, 22 Amp, 4-speed motor, 50-120/80-190/110-270/180-420 RPM
-
Electric Drill, Reversible, 9 Amp, 510 / 950 RPM, Wt: 7 lbs.
-
Male Square Drive, 1/2″, #3 MT (for ETE 32 & EHB 32 series drills)
-
Male Square Drive, 3/4″, #3 MT (for ETE 32 & EHB 32 series drills)
-
Male Square Drive, 1/2″, #2 MT (for ETE 32 & EHB 32 series drills)
-
Electric Drill, Reversible, #3MT, 20 Amp, 4-speed motor with control box
-
Electric Drill, 15.5 Amp, 110/175/245/385 RPM, 1-1/4″ drilling cap. in steel, Wt: 15.2 lbs
-
Electric Drill, 10.5 Amp, 250 / 450 RPM, 3/4″ drilling cap. in steel, Wt: 9.2 lbs.
-
Electric Drill, Reversible, #3MT, 20 Amp, 4-speed motor, 80/130/360/570 RPM
-
Wood Boring Air Drill, reversible, for underwater use, 3 HP, 380 RPM, 3″ drill cap. in wood, Wt: 24.75 lbs.
-
Wood Boring Air Drill, reversible, for underwater use, 3 HP, 700 RPM, 2″ drill cap. in wood, Wt: 24.75 lbs.
-
Wood Boring Air Drill, reversible, for underwater use, 2 HP, 750 RPM, 1″ drill cap. in wood, Wt: 14.5 lbs.
-
D-handle Drill, .8 HP, 650 RPM, 5/8″ drilling cap. in steel, 24 cfm @ 90 psi, Wt: 12 lbs.
-
D-handle Drill, .8 HP, 650 RPM, 1/2″ drilling cap. in steel, 24 cfm @ 90 psi, Wt: 12 lbs.
-
Pistol Drill, .7 HP, 1550 RPM, 3/8″ drilling cap. in steel, 21cfm @ 90 psi, Wt: 4.6 lbs.
-
1/2″ Chuck for 2 1903 0010
-
Hand-Held Dry Diamond Core Drill, 15 Amp, 0 – 1000 and 0 – 2000 RPM, Wt: 12 lbs.
-
Hand-Held Dry Diamond Core Drill, 12 Amp, 2000 RPM, Wt: 7 lbs.
-
Wood Boring Drill Bits, 1-1/8″ dia., 15″ usable length, 18″ overall length, 7/16 hex shank
-
Wood Boring Drill Bits, 1-1/16″ dia., 15″ usable length, 18″ overall length, 7/16 hex shank
-
Wood Boring Drill Bits, 1″ dia., 15″ usable length, 18″ overall length, 7/16 hex shank
-
Wood Boring Drill Bits, 15/16″ dia., 15″ usable length, 18″ overall length, 7/16 hex shank
-
Wood Boring Drill Bits, 7/8″ dia., 15″ usable length, 18″ overall length, 7/16 hex shank
Can’t find what you’re looking for?
Contact us today or call (774) 259-2971.